A fast, general purpose plastic material ideally suited for prototyping applications. The FabPro’s precision printing in this opaque gray material highlights fine features and is ready for finishing and painting, perfect for high quality prototypes and models.
Applications:
- Rapid prototyping
- Design iteration
- High quality prototypes (ready for finishing and painting)
- Display models (ready for finishing and painting)
Technical Specifications
Cured Part Properties
Metric |
U.S. |
|
|---|---|---|
| Solid Density ASTM D792 |
1.13 g/cm3 | 0.041 lb/in3 |
| Tensile Strength ASTM D638 |
67 MPa | 9700 psi |
| Tensile Modulus ASTM D638 |
2800 MPa | 410 ksi |
| Elongation at Break ASTM D638 |
7% | 7% |
| Flexural Modulus ASTM D790 |
2840 MPa | 410 ksi |
| Flexural Strength ASTM D790 |
100 MPa | 14500 psi |
| Izod Notched Impact ASTM D256 |
23 J/m | 0.4 ft-lb/in |
| Izod Unnotched Impact ASTM D256 |
123 J/m | 2.3 ft-lb/in |
| Water Absorption (24 hours) ASTM D638 |
0.25% | 0.25% |
| Tg DMA, E” |
82 °C | 180 °F |
| Heat Deflection Temperature @0.46 MPa | 66 psi @1.82 MPa | 264 psi ASTM D648 |
79 °C 66 °C |
175 °F 151 °F |
| CTE >Tg CTE |
107 ppm/°C 111 ppm/°C |
59 ppm/°F 62 ppm/°F |
| Shore Hardness ASTM D2240 |
83 D | 83 D |
Documents
Support
